How to Clean Samsung Washing Machine Filter Top Loader

If your Samsung washing machine is a top loader, then the filter will be located on the back of the machine. To clean it, first, remove any lint or debris from the inside of the filter housing. Then, using a soft brush or cloth, gently scrub the filter screen to remove any build-up.

Finally, rinse the filter with clean water and reattach it to the housing.

  • Unplug your washing machine from the power outlet
  • Remove the detergent dispenser drawer by pulling it out
  • Locate the filter cover on the side of the washer tub and remove it by unscrewing it
  • Take out the filter and clean it with warm, soapy water
  • Rinse the filter well and put it back in place
  • Screw the cover back on tightly and replace the detergent drawer
  • 7 Plug your washing machine back in to resume using it

How to Clean Samsung Washing Machine Top Loader

If you have a Samsung washing machine, you know that it’s one of the best on the market. But even the best washing machines need to be cleaned from time to time. Here’s how to clean your Samsung washing machine top loader:

1. First, start by unplugging your washing machine and removing any laundry that may be inside.

2. Next, take a damp cloth and wipe down the outside of your washer. This will remove any dirt or dust that has accumulated on the surface.

3. Now it’s time to clean the inside of your washer tub. You can do this by filling your tub with hot water and adding a cup of vinegar or bleach (or both!). Let this mixture sit for 30 minutes before draining it out completely.

4. Once the tub is empty, use a soft brush or sponge to scrub away any remaining dirt or grime. Be sure to rinse well afterwards!

5. Finally, wipe down the door seal and gasket with a clean, damp cloth . . . And that’s it!

Your Samsung washing machine top loader is now sparkling clean!

How to Clean Samsung Washing Machine Filter Top Loader


How Do I Clean the Pump Filter on My Samsung Top Load Washer?

If your Samsung top load washer is giving you trouble, one of the first things you should check is the pump filter. Over time, this filter can become clogged with lint, dirt, and other debris. When this happens, your washer will not be able to drain properly and may even start making strange noises.

Luckily, cleaning the pump filter is a fairly simple process that only takes a few minutes. To clean the pump filter on your Samsung top load washer:

1. Unplug your washer from the power outlet and turn off the water supply valves.

2. Remove the screws from the back panel of your washer and carefully remove the panel.

3. Locate the pump filter (it will be a small round or oval-shaped piece) and unscrew it from its housing.

4. Clean out any debris that may be inside the filter housing with a brush or vacuum attachment.

5. Rinse off the pump filter itself under running water until it is completely clean.

6. Screw the filter back into place and reattach the back panel to your washer.

Do Top Load Washers Have Filters?

Yes, top load washers have filters. The filters are typically located near the water inlet valves and are used to remove impurities from the water before it enters the washing machine. over time, these filters can become clogged with dirt and debris, which can cause problems with the washing machine’s performance.

It is important to clean or replace the filters on a regular basis to keep your top load washer working properly.

How Do I Clean My Washing Machine Top Loader Filter?

If your washing machine has a removable lint filter, it’s important to clean it regularly. Lint and other debris can build up in the filter, causing your washing machine to work less efficiently and potentially damaging your clothes. Here’s how to clean your washing machine lint filter:

1. Remove the lint filter from your washing machine. Most filters are located near the top of the washer tub, but consult your owner’s manual if you’re unsure where yours is located.

2. Rinse the lint filter with warm water to remove any loose debris.

3. Scrub the filter with a soft brush or cloth to remove any stubborn dirt or buildup.

4. Rinse the filter again and replace it in your washing machine.

How To Clean Top Load Washing Machine | Top Load Washing Machine Tub Cleaning | Samsung Washer clean


If your Samsung washing machine is a top loader, then you’ll need to clean the filter regularly in order to keep it running properly. The filter is located behind the control panel on the back of the machine. To access it, simply remove the control panel by unscrewing the two screws that hold it in place.

Once you have access to the filter, open it up and remove any debris or lint that has accumulated inside. Once you’ve cleaned out the filter, replace the control panel and screw it back into place.


Hi, I'm Asim! I love giving you cleaning guides, tips and tricks that will make your place sparkle and shine. Through years of practice, I've learned effective ways to clean and can't wait to help you. From tough spots to general cleaning, I can help you. Come along with me on this cleaning adventure, where I'll give you tips and tricks to make your cleaning process easier. Let's work together to make clean haven.

Leave a Reply

Your email address will not be published. Required fields are marked *