How to Clean Filter on Haier Air Conditioner

If your Haier air conditioner isn’t working as efficiently as it used to, one possible reason is that the filter is dirty. A clean filter will help improve airflow and keep your unit running smoothly.

  • Turn off the power to your Haier air conditioner at the circuit breaker or fuse box
  • Remove the front panel of your Haier air conditioner unit, according to the model you have
  • Locate the filter inside the front grille of your air conditioner unit
  • The location will vary depending on your model number
  • Pull out the old filter and dispose of it properly
  • Rinse off any dirt or debris from the filter grille with warm water and a mild soap if necessary
  • Allow the filter grille to dry completely before installing a new filter
  • Insert a new pleated air filter into the grille, making sure that it is installed correctly and securely in place

Haier Air Conditioner Clean Filter Light Blinking

If you have a Haier air conditioner, you may have noticed that the clean filter light is blinking. This is an indication that the air conditioner’s filter needs to be cleaned. A dirty filter can cause the air conditioner to work less efficiently and can lead to increased energy costs.

cleaning the filter is a simple process that can be done in just a few minutes. To clean the filter, first remove it from the air conditioner unit. The filter is usually located behind a panel on the front of the unit.

Once you have removed the filter, rinse it off with warm water. If there is a lot of dirt and debris on the filter, you may need to use a mild detergent to help remove it all. After rinsing or washing the filter, let dry completely before putting it back in place.

Once the filter is dry, replace it and turn on your air conditioner unit. The clean filter light should now be off, indicating that your Haierair conditioner is now ready to use!

How Do You Clean a Haier Aircon Filter?

If your Haier air conditioner filter becomes dirty, it will need to be cleaned in order to continue providing efficient and effective cooling. Here are the steps you need to take in order to clean your Haier air conditioner filter:

1. Start by unplugging your Haier air conditioner from its power source.

2. Next, remove the front grille of the unit so that you can access the filter.

3. Carefully remove the filter from its housing and rinse it thoroughly with warm water.

4. Use a mild soap if needed to remove any stubborn dirt or debris from the filter.

5. Rinse the filter again with warm water until it is completely clean and free of soap residue.

6. Allow the filter to air dry completely before reinserting it into the air conditioner unit.

How Do I Change the Filter in My Haier Air Conditioner?

If your Haier air conditioner has a filter that needs to be changed, you can follow these steps to do so. First, locate the filter cover on the front of the unit. Then, remove the screws that hold the cover in place and lift it off.

Next, locate the old filter and remove it from the unit. To install the new filter, simply insert it into the unit and replace the cover. Be sure to screw it in place securely.

How Do You Remove a Haier Filter?

If you need to remove a Haier filter, the process is actually quite simple. All you need is a Phillips head screwdriver and about 5 minutes of time. Here are the steps:

1. Locate the two screws on the front of the Haier unit that hold the filter cover in place.

2. Using your Phillips head screwdriver, remove both screws and set them aside.

3. Carefully lift off the filter cover and set it aside as well.

4. Take a look at the filter itself and locate the small tab or notch on one end. This is what you will use to pull the filter out of its housing.

5. Gently pull on the tab or notch until the filter slides out easily from its housing. If it’s stuck, try wiggling it back and forth a bit until it comes free.

6 Set the old filter aside and grab your new one (make sure it’s properly rated for your Haier unit). Slide it into place making sure that the tab or notch lines up with the opening in its housing, then give it a gentle push until it’s fully seated inside.

How Do You Self Clean a Haier Air Conditioner?

If your Haier air conditioner has a self-clean mode, you can follow these steps to clean it:

1. Turn off the air conditioner and unplug it from the power outlet.

2. Remove the front panel of the unit and set it aside.

3. Use a soft cloth or brush to remove any dirt or debris from the evaporator coils and condenser coils. Be sure to clean both sides of the coils.

4. Replace the front panel and plug in the unit.

5. Set the temperature to “self-clean” mode and let it run for about an hour. This will allow any accumulated water inside the unit to evaporate completely.

6. After an hour, turn off the air conditioner and unplug it again from the power outlet. Remove the front panel once more.

Haier AC Filter Cleaning | House Chores


If you have a Haier air conditioner, it’s important to clean the filter regularly. Here’s how to do it: Turn off the air conditioner and unplug it from the power outlet. Remove the front panel of the unit. This will expose the filter. Carefully remove the filter and rinse it with warm water. Allow the filter to dry completely before putting it back in place.


Hi, I'm Asim! I love giving you cleaning guides, tips and tricks that will make your place sparkle and shine. Through years of practice, I've learned effective ways to clean and can't wait to help you. From tough spots to general cleaning, I can help you. Come along with me on this cleaning adventure, where I'll give you tips and tricks to make your cleaning process easier. Let's work together to make clean haven.

Leave a Reply

Your email address will not be published. Required fields are marked *